Proposal Gsm based door lock system

ABSTRACT

This project presents a prototype security door that can be remotely controlled by a GSM phone set acting as the transmitter and another GSM phone set with a dual tone multi-frequency (DTMF) connected to the door motor through a DTMF decoder interfaced with microcontroller unit and a stepper motor .The design is composed of four main functional modules, namely; the GSM module, the decoding module, controlling module and the switching module. The GSM module act as both transmitting and receiving unit employs the use of a mobile phone set serving as the communication device between the user at one end and the object of access (i.e. the door) at the other receiving end. The decoding module and the controlling module are made possible using modern integrated circuit chips ensuring proper conversion of signal to binary codes, enabling the microcontroller to communicate properly with the switching device responsible for opening and closing the door. The codes for this project was written in assembly language with Visual basic software and compiled with M-IDE studio for MC-51compiler which work perfectly with Window XP environment, the program run without error before it was burn onto the microcontroller using a device called the programmer by placing the microcontroller on it socket equal to the pin number.
 DOWNLOAD FULL REPORT

download here
if u like the post just say thank u in comment box.

Proposal GSM based Control System

1.0 Introduction to Project
“GSM based Control System” implements the emerging applications of the GSM technology. Using GSM networks, a control system has been proposed that will act as an embedded system which can monitor and control appliances and other devices locally using built-in input and output peripherals.  Remotely the system allows the user to effectively monitor and control the house/office appliances and equipments via the mobile phone set by sending commands in the form of SMS messages and receiving the appliances status. The main concept behind the project is receiving the sent SMS and processing it further as required to perform several operations. The type of the operation to be performed depends on the nature of the SMS sent. The principle in which the project is based is fairly simple. First, the sent SMS is stored and polled from the receiver mobile station and then the required control signal is generated and sent to the intermediate hardware that we have designed according to the command received in form of the sent message.

 We have selected a particular Nokia mobile set (Nokia 3310) for our project. The messages are sent from the mobile set that contain commands in written form which are then processed accordingly to perform the required task. A microcontroller based system has been proposed for our project. There are several terminologies that are used extensively throughout this project report.

 GSM (Global System for Mobile Communications): It is a cellular communication

standard.

 SMS (Short Message Service): It is a service available on most digital mobile phones that permit the sending of short messages (also known as text messaging service).
DOWNLOAD FULL REPORT WITH PREVIEW HERE
if u like the post just say thank u in comment box.